Description:
main specifications
| highest measuring temperature | 320±0.1℃ |
| measuring precision | ±1% |
| heat conduction beam size | 30*30*430 mm |
| setup of the timer | discretionary |
| rated power | ≦300 W |
| power source | AC220V/50Hz (Customized) |
| digital timeing alarm | any setting |
1. Its main use is to determine the melting point of various types of resin coated sand.
Melting point is a very important indicator of coated sand and has a significant impact on core quality.
2. It uses an intelligent digital display temperature controller to control the temperature to ensure a constant temperature gradient of the square beam.
3. A portable surface temperature sensor that directly measures the temperature at any intercept point.
4. The aluminum alloy heat conducting beam is used, and the uniform measuring hole is made thereon, so that the temperature gradient of the heat conducting beam is
more obviously constant, and the melting point temperature is more convenient and accurate.
5. It has the advantages of convenient operation and reliable measurement data.
- highest measuring temperature: 320±0.1℃
- measuring precision: ±1%
- heat conduction beam size: 30*30*430 mm
- setup of the timer: discretionary
- rated power: ≦300 W
- power source: AC220V/50Hz (Customized)
- digital timeing alarm: any setting
Instrument features
1. Intelligent digital display temperature controlling instrument makes the temperature stable.
2. The thermal conductive beam has measuring holes and it makes measuring temperature is more accurate.
3. More simple operation,
4. more reliable measured data.
main applications
It is widely used in scientific research, university and labs....
It is an indispensable instrument for determining the melting point of resin and peritoneal sand in universities, research institutes and factory laboratories.
tips:
The shell-type coated sand casting is heated, and the phenolic resin coated on the outer surface of the sand begins to melt. The temperature at which the sand is bonded together is called the melting point of the coated sand casting.
Inspection method: (ZBG39005-89):
First, the temperature on the metal plate surface of the melting point analyzer is increased from 60 to 130 degrees Celsius in the axial direction, and is divided into a plurality of different temperature intervals, and the temperature of each interval should be kept constant.
During the inspection, a special strip of coated strips with a thickness of 1.5 mm and a width of 20 mm was evenly sprinkled on the above-mentioned metal test plate surface, and kept for 1 min to start melting, and then a stable 0.05 MPa air was used. Blow the nozzle and move it along the guide rod of the instrument at a constant speed to blow off the uncoated shell sand.
Finally, the melting point of the coated sand casting is determined by the temperature at which the amount of sand on the low temperature end plate is 50% or more.
Each sample was measured 3 times, and the average value was taken as the test result.
Product Tags:
|
|
Foundry Sand Melting Point Equipment , Melting Point Analysis Machine ±1% Precision Images
|
